Product Hardware Features - TRENDnet TEW-751DR User Manual

TRENDnet User's Guide
Performance
N600 Wireless
Proven concurrent dual band 300 Mbps Wireless N
Wireless Coverage
Extensive wireless coverage with MIMO antenna technology
Compatibility
Compatible with older Wireless G devices
Energy Savings
Embedded GREENnet technology reduces power consumption by up to
50%
IPv6
IPv6 network support
*Maximum wireless signal rates are referenced from IEEE 802.11 theoretical
specifications. Actual data throughput and coverage will vary depending on
interference, network traffic, building materials and other conditions
© Copyright 2013 TRENDnet. All Rights Reserved.

Product Hardware Features

Rear View
Reset Button
WPS Button
10/100Mbps LAN
Ports 1-4
Internet Port
•
Reset Button – Press and hold this button for 10 seconds to reset the router.
• WPS Button (Wi-Fi Protected Setup) – Push and hold this button for 5 seconds
to activate WPS. The Power LED will blink when WPS is activated.
• LAN Ports 1-4 – Connect Ethernet cables (also called network cables) from your
router LAN ports to your wired network devices.
•
Internet Port – Connect an Ethernet cable from your router Internet port to
your modem.
• Power Port – Connect the included power adapter from your router power
port and to an available power outlet.
• On/Off Power Switch – Push the router On/Off power switch to turn your
router "On" (Inner position) or "Off" (Outer position).
TEW-751DR
Power Port
On/Off Power Switch
5