Inbound Filter - TRENDnet TEW-751DR User Manual

TRENDnet User's Guide

Inbound Filter

Access > Inbound Filter
Inbound Filters allows you to allow or deny a specific range of IP addresses. You can
create a predefined range of IP addresses to apply to a specific feature.
Note: You can apply a predefined inbound filter to the following features:
• Remote Management
• Virtual Server
1. Log into your router management page (see
on page 25).
2. Click on Access, and click on Inbound Filter.
3. Review the inbound filter settings.
• Enable – Check the option to enable the IP address range.
• Action – Select Allow to allow the specified IP address range or Deny to deny the
specified IP address range.
• Name – Enter a name for the IP address range.
• Remote Start IP Address/End IP Address - Enter the IP address or IP address
range of the filter (e.g. 192.168.1.20-192.168.1.20 or 192.168.1.20-192.168.1.30).
© Copyright 2013 TRENDnet. All Rights Reserved.
"Access your router management page"
Click Add to save the inbound filter.
Note: Clicking Cancel discards and erases the current information.
You will see the new reservation added to the Inbound Filter Rules List.
You can check the Enable option to enable the filter or uncheck to disable.
You can click the icon to edit the rule or
To save changes, click Save Settings.
TEW-751DR
to delete the rule.
40