Set Up Dhcp Reservation - TRENDnet TEW-751DR User Manual

TRENDnet User's Guide
3. Review the DHCP Server settings. Click Save Settings to save settings.
• Enable DHCP Server: Enable or Disable the DHCP server.
• DHCP IP Address Range: Changes the starting address and ending address for the
DHCP server range. (e.g.192.168.10.20 to 192.168.10.30)
Note: The Start IP and End IP specify the range of IP addresses to automatically
assign to computers or devices on your network.
• DHCP Lease Time – Enter the DHCP lease time in minutes.
Note: The DHCP lease time is the amount of time a computer or device can keep
an IP address assigned by the DHCP server. When the lease time expires, the
computer or device will renew the IP address lease with the DHCP server,
otherwise, if there is no attempt to renew the lease, the DHCP server will
reallocate the IP address to be assigned to another computer or device.
You can also view the current DHCP clients in the Number of Dynamic DHCP Clients list.
© Copyright 2013 TRENDnet. All Rights Reserved.

Set up DHCP reservation

Main > LAN
DHCP (Dynamic Host Configuration Protocol) reservation (also called Static DHCP) allows
your router to assign a fixed IP address from the DHCP server IP address range to a
specific device on your network. Assigning a fixed IP address can allow you to easily
keep track of the IP addresses used on your network by your computers or devices for
future reference or configuration such as virtual server (also called port forwarding, see
"Virtual Server" on page 36) or special applications (also called port triggering, see
"Special Applications" on page 39).
1. Log into your router management page (see
on page 25).
2. Click on Main, and click on LAN.
3. Review the DHCP reservation settings.
• Enable – Enable or Disable the DHCP reservation.
• Computer Name – Enter a name of the device you will assign the DHCP
reservation. Note: You can click the Computer Name drop-down list to select
from an available computer in the DHCP server listing, click >> to copy the
computer's host name/IP address information into the fields.
• IP Address – Enter the IP address to assign to the reservation. (e.g.
192.168.10.101)
Note: You can click the Computer Name drop-down list to select from an
available computer in the DHCP server listing, click >> to copy the computer's
host name/IP address information into the fields.
•
MAC Address – Enter the MAC (Media Access Control) address of the computer
or network device to assign to the reservation. (e.g. 00:11:22:AA:BB:CC)
Note: You can click Clone your PC's MAC Address to copy the current
computer's MAC address into the MAC address field.
TEW-751DR
"Access your router management page"
30