TP-Link TL-WA7210N User Manual page 59

TL-WA7210N
The Wireless MAC Address Filtering feature allows you to control wireless stations accessing the
AP, which depend on the station's MAC addresses.
Selected SSID - If Multi-SSID is enabled, you can choose one of the SSIDs from the

pull-down list.
MAC Address - The wireless station's MAC address that you want to access.

Status - The status of this entry either Enabled or Disabled.

Description - A simple description of the wireless station.

Modify - Here you can modify or delete an existing rule.

To disable the Wireless MAC Address Filters feature, keep the default setting, Disable.
To set up an entry, click Enable, and follow these instructions:
First, you must decide whether the specified wireless stations can or cannot access the AP. If you
desire that the specified wireless stations can access the AP, please select the radio button Allow
the stations specified by any enabled entries in the list to access, otherwise, select the radio
button Deny the stations specified by any enabled entries in the list to access.
2.4GHz 150Mbps Outdoor Wireless Access Point User Guide
Figure 4-9 Wireless MAC address Filtering
49