Ip & Mac Binding; Binding Setting - TP-Link TL-WA7210N User Manual

TL-WA7210N
Description - The information of description include address range, the port range and

protocol of transport layer.
Egress Bandwidth - The max upload speed which through the WAN port. The default

number is 0.
Ingress Bandwidth - The max download speed which through the WAN port. The default

number is 0.
Enable - Rule status, which shows whether the rule takes effect.

Modify - Choose to modify or delete an existing entry.

5.15 IP & MAC Binding
ARP Binding is useful for controlling access of specific computers in the LAN.
the IP & MAC Binding Setting table; you can operate it in accord with your desire.
There are two submenus under the IP & MAC Binding menu (shown in Figure 5-63): Binding
Setting and ARP List. Click any of them, and you will be able to configure the corresponding
function. The detailed explanations for each submenu are provided below.
5.15.1

Binding Setting

Selecting IP & MAC Binding > Binding Setting will allow you to configure the binding entries, as
shown in Figure 5-64.
MAC Address - The MAC address of the controlled computer in the LAN.

IP Address - The assigned IP address of the controlled computer in the LAN.

Bind - Check this option to enable ARP binding for a specific device.

Modify - To modify or delete an existing entry.

When you want to add or modify an IP & MAC Binding entry, you can click the Add New button
or Modify button, and then you will go to the next page. This page is used for adding or
modifying an IP & MAC Binding entry (shown in Figure 5-65).
2.4GHz 150Mbps Outdoor Wireless Access Point User Guide
Figure 5-63 the IP & MAC Binding menu
Figure 5-64 Binding Setting
115
This page displays