Fujitsu MPB3021AT Product Manual page 117

Disk drives
Hide thumbs Also See for MPB3021AT:
Table of Contents

Advertisement

Attribute ID
The attribute ID is defined as follows:
Attribute ID
0
1
2
3
4
5
7
8
9
10
12
13 to 198
199
200
201 to 255
Status flag
Bit 0: If this bit is 1, the attribute is within the insurance range of the device when the
attribute exceeds the threshold.
If this bit is 0, the attribute is outside the insurance range of the device when the attribute
exceeds the threshold.
Bits 1 to 15: Reserved bits
Current attribute value
The current attribute value is the normalized raw attribute data. The value varies between
01h and 64h. The closer the value gets to 01h, the higher the possibility of a failure. The
device compares the attribute values with thresholds. When the attribute values are larger
than the thresholds, the device is operating normally.
Attribute value for the worst case so far
This is the worst attribute value among the attribute values collected to date. This value
indicates the state nearest to a failure so far.
5 - 52
(Indicates unused attribute data.)
Read error rate
Throughput performance
Spin up time
Number of times the spindle motor is activated
Number of alternative sectors
Seek error rate
Seek time performance
Power-on time
Number of retries made to activate the spindle motor
Number of power-on-power-off times
(Reserved)
Ultra ATA CRC Error Rate
Write error rate
(Unique to vendor)
C141-E045-02EN
Attribute name

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mpb3032atMpb3043atMpb3052atMpb3054atMpb3064at

Table of Contents