Power Mode Transition; Unsupported Functions; Figure 4.1 Power Mode - Fujitsu MCJ3230AP Product Manual

4.4.7.8 Power mode transition

The power mode transits as shown in Figure 4.1.
inserted.
Media is
(1)
(4)
(5)
(1) The ODD enters idle mode because it receives the Idle Immediate command
or because it receives no commands within a specified time.
(2) The ODD enters idle mode with the Idle Immediate command.
(3) The ODD enters standby mode with the Standby Immediate command and
standby timer.
(4) The ODD enters active mode because it receives a media access command.
(5) The ODD enters sleep mode with the Sleep command.

4.4.8 Unsupported functions

The ODD does not support the following functions which are covered by the
ATA/ATAPI-5 standard.
!
Overlapped feature set
!
Queued feature set
!
Advance Power Management feature set
! Security Mode feature set
!
Power-Up In Standby feature set
C156-E205-01EN
Active
(5)
(2)
(3)
Sleep

Figure 4.1 Power mode

4.4 Various Processes
Reset
(4)
(3)
Standby
(5)
Media is ejected.
4-19