Chapter 1 General Description - Fujitsu MCJ3230AP Product Manual

CHAPTER 1 General Description

1.1 Features
1.2 Drive Configuration
1.3 System Configuration
This chapter describes the features and configuration of the optical disk drives.
The MCJ3230AP (hereafter, the optical disk drive) is the successor model to the
MCE3130AP. This optical disk drive, which maintains compatibility with the
MCE3130AP, offers high performance and high capacity. Supporting 2.3 GB of
storage capacity, this device delivers superior performance with a 5,455-rpm
rotational speed, and supports security functions.
The optical disk drive is high-performance, 90 mm (3.5-inch) commutative
rewritable optical disk drive which incorporates an ATAPI controller.
The interface connecting the optical disk drive to the host system complies with
the ATA/ATAPI-4.
The flexibility and expandability through ATAPI I/F, the high performance of the
optical disk drive, and the drive's commands set enable the user to construct high-
reliability, high-performance disk subsystems with advanced functions and large-
scale storage.
1.1 Features
This section describes the following drive features:
!
Performance
!
Reliability
! Maintainability/operability
!
Adaptability
!
Interface
C156-E205-01EN 1-1