Hardware Monitor - Asus P7H55 DVI User Manual

[Ctrl-Esc]
[Power Key]
3.7.7

Hardware Monitor

Hardware Monitor
CPU Temperature
MB Temperature
CPU Fan Speed
CPU Q-Fan Control
Chassis Fan 1 Speed
Chassis Q-Fan Control
Power Fan Speed
CPU Voltage
3.3V Voltage
5V Voltage
12V Voltage
CPU/MB Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the CPU and motherboard
temperatures. Select Ignored if you do not wish to display the detected temperatures.
CPU Fan Speed [xxxxRPM] or [Ignored] / [N/A]
Chassis Fan 1 Speed [xxxxRPM] or [Ignored] / [N/A]
Power Fan Speed [xxxxRPM] or [Ignored] / [N/A]
The onboard hardware monitor automatically detects and displays the CPU, chassis, and
power fan speed in rotations per minute (RPM). If the fan is not connected to the motherboard,
the field shows N/A. Select Ignored if you do not wish to display the detected speed.
CPU Q-Fan Control [Disabled]
[Disabled]
[Enabled]
CPU Fan Profile [Standard]
This item appears only when you enable the CPU Q-Fan Control feature and allows
you to set the appropriate performance level of the CPU fan.
[Standard]
[Silent]
[Turbo]
[Manual]
3-30
Allows you to turn on the system by pressing the Ctrl key and Esc key
of the PS/2 keyboard. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead.
Allows you to turn on the system by pressing the Power key on the PS/2
keyboard. This feature requires an ATX power supply that provides at least
1A on the +5VSB lead.
BIOS SETUP UTILITY
[35ºC/95ºF]
[34ºC/93ºF]
[3590RPM]
[Disabled]
[N/A]
[Disabled]
[N/A]
[ 1.040V]
[ 3.008V]
[ 4.776V]
[11.648V]
Disables the CPU Q-Fan control feature.
Enables the CPU Q-Fan control feature.
Sets to [Standard] to make the CPU fan automatically adjust
depending on the CPU temperature.
Sets to [Silent] to minimize the fan speed for quiet CPU fan
operation.
Sets to [Turbo] to achieve maximum CPU fan speed.
Sets to [Manual] to assign detailed fan speed control parameters.
Power
CPU Temperature(PECI)
Chapter 3: BIOS setup