Asus P7P55 LX JOOYON SI User Manual page 46

• NTFS is not supported under DOS environment. Do not save the BIOS file and BIOS
• Do not save the BIOS file to a floppy disk due to low disk capacity.
3. Turn off the computer and disconnect all SATA hard disk drives (optional).
Booting the system in DOS environment
1. Insert the USB flash drive with the latest BIOS file and BIOS Updater to the USB port.
Boot your computer. When the ASUS Logo appears, press <F8> to show the BIOS
2.
Boot Device Select Menu. Insert the support DVD into the optical drive and select the
optical drive as the boot device.
SATA:XXXXXXXXXXXXXXXX
CDROM:XXXXXXXXXXXXXXX
USB:XXXXXXXXXXXXXXXXX
Network:XXXXXXXXXXXXX
When the Make Disk menu appears, select the FreeDOS command prompt item by
3.
pressing the item number.
4. At the FreeDOS prompt, type d: and press <Enter> to switch the disk from
Drive C (optical drive) to Drive D (USB flash drive).
Welcome to FreeDOS (http://www.freedos.org)!
C:\>d:
D:\>
Backing up the current BIOS
To backup the current BIOS file using the BIOS Updater
Ensure that the USB flash drive is not write-protected and has at least 1024KB free space
to save the file.
1. At the FreeDOS prompt, type bupdater /o[filename] and press <Enter>.
D:\>bupdater /oOLDBIOS1.rom
The [filename] is any user-assigned filename with no more than eight alphanumeric
characters for the filename and three alphanumeric characters for the extension.
2. The BIOS Updater backup screen appears indicating the BIOS backup process. When
BIOS backup is done, press any key to return to the DOS prompt.
2-4
Updater to a hard disk drive or USB flash drive in NTFS format.
Please select boot device:
↑ and ↓ to move selection
ENTER to select boot device
ESC to boot using defaults
Filename Extension
ASUS P7P55 LX