Installing A Dimm; Removing A Dimm - Asus P7P55 LX JOOYON SI User Manual

1.7.3

Installing a DIMM

Ensure to unplug the power supply before adding or removing DIMMs or other system
components. Failure to do so may cause severe damage to both the motherboard and the
components.
To install a DIMM
1. Unlock a DIMM socket by pressing the
retaining clip outward.
2. Align a DIMM on the socket such that
the notch on the DIMM matches the
break on the socket.
A DIMM is keyed with a notch so that it fits in only one direction. DO NOT force a DIMM into
a socket to avoid damaging the DIMM.
3. Firmly insert the DIMM into the socket
until the retaining clip snaps back in
place and the DIMM is properly seated.
1.7.4

Removing a DIMM

Follow these steps to remove a DIMM.
1. Press the retaining clip outward to
unlock the DIMM.
Support the DIMM lightly with your
fingers when pressing the retaining
clip. The DIMM might get damaged
when it flips out with extra force.
2. Remove the DIMM from the socket.
1-18
Unlocked retaining clip
Locked Retaining Clip
2
Chapter 1: Product introduction
2
DIMM notch
1
3
1