Asus H87-PRO User Manual page 95

PS/2 Keyboard and Mouse Support [Auto]
Select any of these settings when PS/2 keyboard and mouse are installed. These
settings only apply when Fast Boot is enabled.
[Auto]
[Full Initialization]
[Disabled]
Network Stack Driver Support [Disabled]
[Disabled]
[Enabled]
Next Boot after AC Power Loss [Normal Boot]
[Normal Boot]
[Fast Boot]
Boot Logo Display [Enabled]
[Enabled]
[Disabled]
Set this item to [Enabled] to use the ASUS MyLogo 2™ feature.
Boot Logo Size Control [Auto]
This item appears only when you set the Boot Logo Display item to [Enabled].
[Auto]
[Full Screen]
3-40
For a faster POST time, PS/2 devices will only be available when
the system boots up or rebooted when the PS/2 devices have not
been reconnected or changed. If you disconnect or change PS/2
devices before restarting the system, PS/2 devices will not be
available and BIOS setup program will not be accessible via PS/2
devices.
For full system control, PS/2 devices will be available during
POST at any circumstances. This process will extend POST time.
For the fastest POST time, all PS/2 devices will not be available
until your computer enters the operating system.
Select to skip the network stack driver from loading during POST.
Select to load the network stack driver during POST.
Returns to normal boot on the next boot after an AC power loss.
Accelerates the boot speed on the next boot after an AC power loss.
Display the boot logo during POST.
Hide the logo during POST.
Automatically adjust the boot logo size according to Windows
requirements.
Display the boot logo in full screen.
®
Chapter 3: BIOS setup