Asus H87-PRO User Manual page 33

3. USB 2.0 connectors (10-1 pin USB910, USB1112, USB1314)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification supporting up to
480 Mbps connection speed.
H87-PRO
H87-PRO USB2.0 connectors
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
• The USB 2.0 module is purchased separately.
• These connectors are based on xHCI specification. We recommend you to install the
related driver to fully use the USB 2.0 ports under Windows
4. Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port(s).
Connect the S/PDIF Out module cable to this connector, then install the module to a
slot opening at the back of the system chassis.
H87-PRO
H87-PRO Digital audio connector
The S/PDIF module is purchased separately.
ASUS H87-PRO
USB910 USB1112 USB1314
PIN 1 PIN 1 PIN 1
SPDIF_OUT
7.
®
1-19