Setting Ipv6 Addresses; Installing Printer Driver; Connecting Syncthru™ Web Service - Samsung ML-6512ND User Manual

5. Press the up/down arrow to highlight On and press OK.
6. Turn the machine off and turn it on again.
7. Reinstall your printer driver.

Setting IPv6 addresses

Machine supports following IPv6 addresses for network printing and man-
agements.
• Link-local Address: Self-configured local IPv6 address. (Address starts
with FE80.)
• Stateless Address: Automatically configured IPv6 address by a net-
work router.
• Stateful Address: IPv6 address configured by a DHCPv6 server.
• Manual Address: Manually configured IPv6 address by a user.
DHCPv6 address configuration (Stateful)
If you have a DHCPv6 server on your network, you can set one of the
following option for default dynamic host configuration:
1. Press Menu on the control panel.
2. Press the up/down arrow to highlight Network and press OK.
3. Press the up/down arrow to highlight TCP/IP (IPv6) and press OK.
4. Press the up/down arrow to highlight DHCPv6 Config and press
OK.
5. Press the up/down arrow to access the required value.
• Router: Use DHCPv6 only when requested by a router.
• DHCPv6 Addresses: Always use DHCPv6 regardless of router
request.
• DHCPv6 Off: Never use DHCPv6 regardless of router request.
6. Press OK.
Manual address configuration
1. Start a web browser such as Internet Explorer that supports IPv6
addressing as a URL (See "Connecting SyncThru™ Web Service"
on page 39).
For IPv4, enter the IPv4 address (http://xxx.xxx.xxx.xxx) in the
address field and press the Enter key or click Go.
2. Click Login on the upper right of the SyncThru™ Web Service web-
site.
A log-in page appears.
3. Type in the ID and Password then click Login.
If it's your first time logging into SyncThru™ Web Service, type in the
below default ID and password.
• ID: admin
• Password: sec00000
4. When the SyncThru™ Web Service window opens, click Settings
> Network Settings.
5. Click TCP/IPv6.
6. Enable the Manual Address in the TCP/IPv6 section.
IPv6 Protocol should be enabled.
7. Select the Address / Prefix and click the Add button, then the router
prefix will automatically be entered into the address field.
Enter the rest of address. (ex: 3FFE:10:88:194::AAAA. "A" is the
hexadecimal 0 through 9, A through F.)
8. Click the Apply button.

Installing printer driver

Driver installation for network printer in IPv6 network environment is same
as TCP/IPv4 (See "Installing network connected machine's driver" on
page 36).
Select TCP/IP Port and when the list of machines are displayed, simply
select your machine's IPv6 address.
Connecting SyncThru™ Web Service
1. Start a web browser such as Internet Explorer that supports IPv6
addressing as a URL.
2. Click Go to access the SyncThru™ Web Service.
3. Click Login on the upper right of the SyncThru™ Web Service website.
A log-in page appears.
4. Type in the ID and Password then click Login.
If it's your first time logging into SyncThru™ Web Service, type in the
below default ID and password.
• ID: admin
• Password: sec00000
5. Select one of the IPv6 addresses (Link-local Address, Stateless
Address, Stateful Address, Manual Address) from Configuration
Report.
6. Enter the IPv6 addresses. (ex: http://[FE80::215:99FF:FE66:7701])
Address must be enclosed in '[]' brackets.
Network setup_ 39