Table of Contents
Advertisement
IPv6 configuration
Setting IPv6 addresses
The machine supports the following IPv6 addresses for network printing and
managements.
•
Link-local Address: Self-configured local IPv6 address (Address starts with
FE80).
•
Stateless Address: Automatically configured IPv6 address by a network
router.
•
Stateful Address: IPv6 address configured by a DHCPv6 server.
•
Manual Address: Manually configured IPv6 address by a user.
DHCPv6 address configuration (Stateful)
If you have a DHCPv6 server on your network, you can set one of the following
options for default dynamic host configuration.
1
Press the
(Menu) button on the control panel.
2
Press Network > TCP/IP (IPv6) > DHCPv6 Config.
3
Press OK to select the required value you want.
•DHCPv6 Addr.: Always use DHCPv6 regardless of router request.
•DHCPv6 Off: Never use DHCPv6 regardless of router request.
•Router: Use DHCPv6 only when requested by a router.
11
From the SyncThru™ Web Service
For models that do not have the display screen on the control panel, you
need to access SyncThru™ Web Service first using the IPv4 address and
follow the below procedure to use IPv6.
1
Access a web browser, such as Internet Explorer, from Windows. Enter
the machine IP address (http://xxx.xxx.xxx.xxx) in the address field and
press the Enter key or click Go.
2
If it's your first time logging into SyncThru™ Web Service you need to
log-in as an administrator. Type in the below default ID and password.
•ID: admin
•Password: sec00000
When the SyncThru™ Web Service window opens, move the mouse
3
cursor over the Settings of the top menu bar and then click Network
Settings.
4
Click TCP/IPv6 on the left pane of the website.
5
Check the IPv6 Protocol check box to activate IPv6.
6
Check the Manual Address check box. Then, the Address/Prefix text
box is activated.
2. Using a network-connected machine
102
Hide quick links:
Advertisement
Chapters
Table of Contents
