Replacing The Imaging Unit - Samsung ML-6512ND User Manual

3. Thoroughly shake the cartridge 5 or 6 times to distribute the toner evenly
inside the cartridge.
Thoroughly roll the cartridge to assure maximum copies per cartridge.
Save the box and the plastic bag for shipping.
If toner gets on your clothing, wipe it off with a dry cloth and wash
clothing in cold water. Hot water sets toner into fabric.
4. Remove the protection seal.
5. Hold the toner cartridge by the handle and slowly insert the cartridge into
the opening in the machine.
Tabs on the sides of the cartridge and corresponding grooves within the
machine will guide the cartridge into the correct position until it locks into
place completely.
6. Close the top cover. Make sure that the cover is securely closed.

REPLACING THE IMAGING UNIT

Click this link to open an animation about replacing the imaging unit.
When the imaging unit reaches its estimated life:
• The Smart Panel program window appears on the computer telling you
the imaging unit needs to be replaced.
• The LCD display shows a message telling you the imaging unit needs to
be replaced.
• The machine stops printing.
At this stage, the imaging unit needs to be replaced. Check the type of the
imaging unit for your machine (see "Available supplies" on page 95).
1. Open the top cover and pull the toner cartridge out.
Supplies and accessories_ 97