Power Problems; Paper Feeding Problems - Dell 1130 Laser Mono Printer Troubleshooting Manual

The following chart lists some conditions that may occur and the recommended solutions. Follow the suggested solutions
until the problem is corrected. If the problem persists, call for service.

Power problems

Click this link to open an animation about power problems.
The machine is not receiving power,
or the connection cable between the computer and the
machine is not connected properly.

Paper feeding problems

Condition
Paper jams during printing.
Paper sticks together.
Multiple sheets of paper do
not feed.
Paper does not feed into the
machine.
Condition
Clear the paper jam. (See
Check the maximum paper capacity of the tray. (See
Make sure that you are using the correct type of paper. (See
specifications.)
Remove paper from the tray and flex or fan the paper.
Humid conditions may cause some paper to stick together.
Different types of paper may be stacked in the tray. Load paper of only one type, size,
and weight.
Remove any obstructions from inside the machine.
Paper has not been loaded correctly. Remove paper from the tray and reload it
correctly.
Plug in the power cord and press
control panel.
Disconnect the machine cable and reconnect it.
For Local Printing
For Network Printing (Dell 1130n only)
Suggested solutions
Clearing paper jams.)
Suggested solutions
(power) on the
Print media specifications.)
Print media