Table of Contents
Advertisement
Back to Contents Page
Dell™ OptiPlex™ GX620
User's Guide
Removing the Computer Cover
Removing the Computer Cover
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your
computer's electronic components. You can do so by touching an unpainted metal surface on the computer chassis.
1. Follow the procedures in
"Before You
NOTICE:
Before touching anything inside your computer, ground yourself by touching an unpainted metal surface. While you work, periodically touch an
unpainted metal surface to dissipate any static electricity that could harm internal components.
2. If applicable,
remove the cable
3. Remove the computer cover:
a. Rotate the cover release knob in a clockwise direction, as shown in the illustration.
b. Slide the computer cover forward by 1 cm (½ inch), or until it stops, and then raise the cover.
1 release knob
Back to Contents Page
Begin."
cover.
Advertisement
Table of Contents
