FujiFilm 3500 Instruction Manual page 44

4. USAGE OF PRINTER DRIVER
Table 2 : PG4000 2 /4500 (for UC type) Printable size of Border
Print
Paper Size V1.0 Mode checked
4R 96mm x 146mm
4H 96mm x 172mm
4P 96mm x 248mm
5R 121mm x 172mm
5H 121mm x 216mm
5P 121mm x 350mm
8 x 10 248mm x 197mm
10 x 12 248mm x 299mm
Letter 273mm x 210mm
Double 273mm x 426mm
Letter
Letter Wide 309mm x 249mm
12 x 18 309mm x 451mm
Double 309mm x 459mm
Letter Wide
Table 3 : PG4000 /4500 (for CE type) Printable size of Border
2
Print
Paper Size V1.0 Mode checked
KG 96mm x 144mm
KH 96mm x 172mm
KPA 96mm x 248mm
2LC 121mm x 172mm
HVK 121mm x 220mm
PAB 121mm x 347mm
10 x 12Half 248mm x 146mm
8 x 10 248mm x 197mm
10 x 12 248mm x 299mm
10 x 12Wide 248mm x 379mm
A4 291mm x 204mm
A3 291mm x 414mm
A4Wide 309mm x 249mm
12 x 18 309mm x 450mm
A3Wide 309mm x 459mm
3. Setting print conditions
Open the print data file and select [Print] from the [File] menu.
The following screen appears:
• Number of copies
Specify the number of copies you plan to print. The maximum
number of copies is 50.
• Page
Specify the range of pages to print. You can select all pages, or
specify a range using page numbers.
42
V1.0 Mode not checked
95.2mm x 142.8mm
95.2mm x 171.4mm
95.2mm x 247.6mm
120.6mm x 171.4mm
120.6mm x 215.9mm
120.6mm x 349.2mm
247.6mm x 196.8mm
247.6mm x 298.4mm
269.8mm x 209.5mm
269.8mm x 425.4mm
307.9mm x 247.6mm
304.8mm x 450.8mm
307.9mm x 457.2mm
V1.0 Mode not checked
95.2mm x 142.8mm
95.2mm x 171.4mm
95.2mm x 247.6mm
120.6mm x 171.4mm
120.6mm x 219mm
120.6mm x 346mm
247.6mm x 142.8mm
247.6mm x 196.8mm
247.6mm x 298.4mm
247.6mm x 377.8mm
288.9mm x 203.2mm
288.9mm x 412.7mm
307.9mm x 247.6mm
307.9mm x 450.8mm
307.9mm x 457.2mm
4. Setting image processing options
Click the [Image processing] button on the print condition setup
screen.
The following screen appears:
• Brightness
Adjust the print density. Settings toward the right (plus direc-
tion) result in lighter prints, while settings toward the left (mi-
nus direction) result in darker prints.
• Contrast
Adjust the print contrast. Settings toward the right (plus direc-
tion) produce higher contrast, while settings toward the left
(minus direction) produce lower contrast.
• Color balance (Red/Green/Blue)
Adjust color balance for prints. Settings toward the right (plus
direction) result in higher print density of the color specified,
while settings toward the left (minus direction) result in lower
print density of the color specified.
• Image process
Select a color-matching function. This color-matching func-
tion refers to the one provided with the PICTROGRAPHY,
which provides the following options:
ON1 (CG): Performs color conversions suitable for print-
ing high-chroma images, including computer
graphics.
Intended for monitors having color tempera-
tures of 9300K*
ON2 (Photo): Produces somewhat softer prints.
Intended for monitors having color tempera-
tures of 6500K and γ 1.8.
ON3 (sRGB): Suitable for printing with an sRGB*
tor.
As compared with ON1 setting, ON3 setting
enables to print saturated colors lower in
brightness and higher in saturation.
ON4 : A color-matching function will work that
(PG3000 OFF) produces results close to that obtained with
PICTROGRAPHY3000 color matching
function set to "OFF" (for 3500).
ON4 : A color-matching function will work that
(PG4000 OFF) produces results close to that obtained with
PICTROGRAPHY4000 color matching
function set to "OFF" (for 4000
OFF: Disable printer color matching.
With this option selected, gray reproduction
is determined by settings for [Gray balance].
1 2
and γ 2.2* .
3 moni-
/4500).
2