Installing/Using The Dicing Disc - KitchenAid KFP1642CA Instructions Manual

USINg YOUR ACCESSORIES
Installing/using the dicing kit
Place the disc adapter onto the
1
power shaft.
Place the dicing kit blade ➂, making sure
3
it is securely seated.
Place the lid on the Food Processor
5
and use the medium feed tube to dice
the desired items. If lid does not fully
close, make sure the dicing kit and the
dicing grid are each fully seated.
16
Place the dicing kit grid ➁, with the grid
2
facing front, and line up the kit's tab
with the groove in the work bowl.
Place the dicing kid lid ➃ onto the
4
assembled kit with the hole facing front,
and lock into place.
After dicing, remove the dicing kid lid
6
➃ and the dicing kit blade ➂, and place
the dicing kit cleanout tool ➄ in the
notches on the dicing kit grid, then push
cleanout tool down into the dicing grid.
This will push remaining food out of the
grid, enabling you to wash the dicing
kit more efficiently.
NOTE: Hard foods like carrots may require
more force to remove with the dicing kit
cleanout tool. It is normal for some food to
remain in the grid until washing is complete.