Installing The Input/Output (I/O) Panel - Dell Vostro 3800 Owner's Manual

3. Follow the steps below to disconnect the I/O panel cables:
a. Disconnect the I/O panel and FlyWire cables from the system board.
b. Un-thread the cables from the metal retention clips.
4. Follow the steps below to remove the I/O panel:
a. Remove the screw that secures the I/O panel to the computer.
b. Slide the I/O panel outwards and remove it from the computer.

Installing The Input/Output (I/O) Panel

1. Slide the I/O panel into its slot on the computer.
2. Replace the screw that secures the I/O panel.
3. Route the three cables through the metal clips.
4. Connect the three I/O panel and FlyWire cables to the system board.
19