Resetting Factory Settings - Marantz SR6008 Owner's Manual

Contents

Resetting factory settings

Perform this procedure if the display is abnormal or if operations cannot be performed.
Various settings are reset to the factory default values. Make settings again.
ZONE2 SOURCE
X
M-DAX
Front panel Display
Connections Playback
Rear panel
Settings
1
Turn off the power using X.
2
Press X while simultaneously pressing ZONE2 SOURCE
and M-DAX.
3
Once the display starts flashing at intervals of about 1
second, release the two buttons.
%
• If in step 3 the display does not flash at intervals of about 1 second, start over
from step 1.
208
Remote
Tips Appendix
Index