Connecting To A Pc - FujiFilm FinePix FinePix S6500fd Owner's Manual

Connecting to a PC

By connecting the camera to a PC, your system can be
expanded to fill a wide range of uses. Using
"FinePixViewer" performs images saving, browsing and
file management etc.
MEMO
If the power cuts out during data transmission, the data
will not be transmitted correctly. Always use the AC power
adapter when connecting the camera to a PC.
Refer to Software
Installation (➝p.140, 143)
the first time you connect
the camera to your PC.
Install the software first. Do
not connect the camera to
the PC before installing all
the software.
A Insert the xD-Picture Card with images into the
camera (➝p.22).
CAUTION
• Do not format the xD-Picture Card in the camera on
the PC.
• Use the xD-Picture Card with images taken by a
FUJIFILM Digital camera.
• When connecting to a PC, if the xD-Picture Card
contains large image or movie files, connection or
transmission may take time or images may not be
stored. In these cases, use the Image Memory Card
Reader (sold separately), etc.
B Connect the camera to your PC using the USB cable
(mini-B).
146
CD-ROM
(Software for FinePix CX)
AC-5VX
(sold
separately)
;USB
socket (mini-B)
C Set the Power switch to w to turn the camera on.