Adjust The Image Outline (Hard/Soft) (G Sharpness); Adjust The Amount Of Light Emitted By The Flash ( Flash (Brightness Adjustment)) - FujiFilm FinePix FinePix S6500fd Owner's Manual

Adjust the image outline (hard/
soft) (G SHARPNESS)
Available Photography modes: N, M, <, >
Use this setting to soften or emphasize the outline and
quality of an image.
HARD:
SHOOTING MENU SHOOTING MENU
Emphasizes the outlines.
Best for shots of subjects
SELF-TIMER SELF-TIMER
OFF OFF
PHOTOMETRY PHOTOMETRY
such as buildings or text
WHITE BALANCE WHITE BALANCE
AUTO AUTO
where sharp images are
HIGH - SPEED SHOOTING HIGH SPEED SHOOTING
HARD HARD
AF MODE AF MODE
desirable.
STANDARD STANDARD
SHARPNESS SHARPNESS
SOFT SOFT STANDARD:
Best for ordinary
photography. Provides edge
This example of display
*
sharpness that is ideal for
appears when Intelligent
Face Detection is off. most picture taking situations.
SOFT:
Softens the outlines. Best for
shots of subjects such as
people, where a softer image
is desirable.
Adjust the amount of light
emitted by the flash
( FLASH (Brightness
Adjustment))
Available Photography modes: N, M, <, >
Use this setting to change the amount of light emitted by
the flash to suit the photography conditions or to achieve
a desired effect.
SHOOTING MENU SHOOTING MENU
FLASH FLASH
BRACKETING BRACKETING
SET SET - - UP UP
CHECK
Compensation range:
• – 2/3 EV to +2/3 EV in approx. 1/3 EV increments (total:
5 levels selectable)
• Explanation of Terms "EV" (➝p.181)
CAUTION
• Depending on the type of subject and the shooting
distance, brightness adjustment may have no effect.
• The image may appear dark when setting the shutter
speed to higher than 1/1000 sec.
Setting the menu (➝p.81)
2 /
+ 3
1 /
+ 3
+ 0
-
1 /
- 3
2 /
- 3
95