Directory
Speed dial
The telephone system has 10 speed dial locations (0-9) where you can store
the telephone numbers you wish to dial more quickly. You can store up to
24 digits in each location. A speed dial number can be selected from the
directory or caller ID history, or entered directly. Numbers assigned to speed
dial locations are stored in the directory.
Enter a speed dial number
1.
Press SPEED DIAL when the telephone is in idle mode.
2.
Press
p
or
DIR
/SELECT. The screen shows Press [SELECT].
press
MENU
-OR-
Use the dialing keys (0-9) to select your desired speed dial location (0-9).
The screen shows Press [SELECT].
3.
Press
/SELECT, the screen shows Enter
MENU
number. Use the dialing keys to enter a telephone
number (up to 24 digits).
•
Press
q
CID
or right.
•
Press DELETE X to erase a digit.
•
Press
REDIAL
dialing pause (a P appears).
-OR-
Copy the number from the redial memory by
pressing REDIAL/
/SELECT to move on to the name. The
4.
Press
MENU
screen shows Enter name.
5.
Use the dialing keys to enter a name (up to 15
characters) when prompted. Each time you press a key, the character on
that key appears. Additional key presses produce other characters on that
key. See the chart on page 19.
•
Press
q
CID
•
Press DELETE X to erase a character.
•
Press
p
DIR
6.
Press
/SELECT to store your new directory entry. The screen shows
MENU
Saved with a confirmation tone.
NOTE:
•
Numbers can be up to 24 digits and names can be up to 15 characters. If you enter more than 24
digits and 15 characters, you hear an error tone.
•
You cannot enter a new number to speed dial location when the directory is full. You have to
delete some directory entries (page 22) to make room for new storage.
q
to choose your desired speed dial location (0-9), then
CID
or
p
to move the cursor to the left
DIR
/PAUSE to enter a three-second
.
PAUSE
or
p
to move the cursor to the left or right.
DIR
to add a space between words.
23
3:Not assigned
Press [SELECT]
Enter number
800360_
Enter name
LINDA_