Recording To A Specified Track; Clearing A User Song - Yamaha YPT-340 Owner's Manual

Recording to a Specified Track

1
Make the desired settings, such as
those of Voice or Style.
If you want to record the melody performance,
turn ACMP off (page 17). If you want to record
Style playback, turn ACMP on (page 17).
2
While holding down the [REC] button,
press the desired Track button 1 or 2 to
engage the Record mode.
If you want to record Style playback, make sure to
select the Track 2. If you want to record melody
performance, select either Track 1 or Track 2 as
desired. The illustration below is the example
when selecting Track 2.
3
Press the [+], [-] buttons to select the
User Song you want to record.
User 1
rEC
If Track 2 is selected as Recording target for
example and Track 1 contains already recorded
data, L flashes and R lights in the display. Turning
on or off R via the [TRACK 1] button will deter-
mine whether you listen to a previously recorded
Track or not while recording a new Track.
4
Same as in Steps 3 to 5 (page 30) in
"Quick Recording."
Limitations while Recording
• You cannot record the Reverb Level, metronome
click, or the Transpose and Tuning settings.
• The following settings and buttons are not available,
or if operated, the new settings cannot be recorded:
ACMP ON/OFF, Split Point, Reverb Type, Chorus
Type, Harmony Type, [FUNCTION] button, [POR-
TABLE GRAND] button.
001
Recording Your Performance

Clearing a User Song

1
Press the [SONG] button then select the
desired User Song by using the Number
buttons.
2
Press and hold the [REC] button for lon-
ger than a second.
A confirmation message appears.
YES
Hold for longer
than a second.
To cancel the operation, press the [-/NO] button.
3
Press the [+/YES] button.
A confirmation message appears again.
Sure?
YES
To cancel the operation, press the [-/NO] button.
4
Press the [+/YES] button to clear the
Song.
A "Writing!" message appears while the track is
being cleared.
PSR-E343/YPT-340 Owner's Manual
ClrUser1
31