The Functions - Yamaha YPT-340 Owner's Manual

The Functions

The Functions settings provide access to a range of detailed instrument parameters
such as Tuning, Split Point, Voices and Effects.
1
Press the [FUNCTION] button several
times until the desired item appears.
Each time the [FUNCTION] button is pressed, the
Function number increases one by one. You can
also decrease the Function number by one when
you press the [-] button briefly while holding
down the [FUNCTION] button.
Current value
100
After a few seconds, the Function name may be
replaced with the setting value depending on the
selected Function.
NOTE
• The Function number does not appear in the display
during Song, Style or metronome playback. The beat
value appears instead.
Function List
Function
Function name
Number
Volume
001 Style Volume StyleVol
002 Song Volume SongVol
003 AUX IN Volume AuxInVol
Overall
Transpos
004 Transpose
005 Tuning Tuning
SplitPnt
006 Split Point
TouchSns
007 Touch Sensitivity
Style file
StyleReg
008 Style Register
Function name
StyleVol
001
Function number
Display Range/Settings
000–127
000–127
000–127
-12–12
427.0Hz–453.0Hz
036–096 (C1–C6)
1 (Soft),
2 (Medium),
3 (Hard),
4 (Off)
001–nnn
2
Set the value by using the number but-
tons [0]–[9], [+], [-].
• Decrement
value by 1.
• No
Press simultaneously
• Off
to recall the default
setting.
NOTE
• To exit the Function settings, press one of these buttons;
[SONG], [VOICE], [STYLE] or [GRAND PIANO].
Default Value
100 Determines the volume of the Style. (page 17)
100 Determines the volume of the Song. (page 22)
Determines the volume of the external audio device connected to
100
the instrument's [AUX IN] jack. (page 25)
0 Determines the pitch of the instrument in semitone increments.
Determines the fine tuning of the pitch of the entire instrument in
440.0Hz
approx. 0.2Hz increments.
Determines the highest key for the Split Voice and sets the Split
"point"—in other words, the key that separates the Split (lower)
54 (F#2)
and Main (upper) Voices. The Split Point setting and Accompani-
ment Split Point setting are automatically set to the same value.
Higher values produce greater (easier) volume variation in
response to keyboard dynamics. When 4 (Off) is selected, Touch
2 (Medium)
Response is off and the volume level does not change at all
regardless of whether you play the keyboard soft or hard.
Select and register a Style file from flash files that are loaded from
–
computer (page 18).
PSR-E343/YPT-340 Owner's Manual
Direct numeric
entry.
• Increment
value by 1.
• Yes
• On
Descriptions
33