Recording To A Specified Track - Yamaha PSR-I455 Owner's Manual

Recording to a Specified Track

The operation here is useful especially when you want
to record the additional performances to an already
recorded Song.
1
Press the [SONG] button, then select the
desired User Song (111–120) as the
recording target.
2
While holding down the [REC] button,
press the desired Track button to enter
the Record Ready mode.
 If you want to record only the melody:
While holding down the [REC] button, press
one of the [1]–[5] buttons.
Press and
hold
User 1
rEC
 If you want to record only the Style play-
back:
Press the [STYLE] button, select the desired
Style, then simultaneously hold down the
[REC] button and press the [6/A] button.
ACMP is automatically turned on.
Press and
hold
User 1
rEC
User 1
111
Song number
001
Track 1 will
flash
001
Recording Your Performance
3
Same as in Steps 4 to 6 (page 28) in
"Quick Recording."
NOTE
• If the memory becomes full while recording, an alert
message will appear and recording will stop automati-
cally. In this case, delete unnecessary data by using the
Clear functions (page 30), then execute the recording
again.
Limitations while recording
• The on/off status of ACMP cannot be changed.
• The Style number cannot be changed.
• When you use a Style, the following parameters
cannot be changed: Reverb Type, Chorus Type,
Time Signature, Style number and Style Volume.
• Performance with a Split Voice cannot be recorded.
PSR-I455 Owner's Manual
29