Save To User Flute Voice - Yamaha Electone EL-500 Owner's Manual

2

Save to User Flute Voice

Saves the currently created Flute Voice to the selected User Flute Voice
memory space.
After you have created a Flute Voice with the Flute, Attack and Volume
pages, you can save that Flute Voice.
To save your own Flute Voice:
1
Press the Page buttons to select the SAVE page.
SAVE Page
2
Select the desired user voice number (USER 1 through 8) to which
the new voice will be saved.
Pressing the appropriate Data Control button saves your new Flute
Voice to that memory space and erases any voice that had been
previously saved there. When the operation has been completed, the
selected User number in the display will momentarily flash.
User voices 1 through 8 correspond to those shown in the Menu
page below.
PAGE
All settings in the Footage, Attack and
Volume pages can be saved to the Save
page, except for the following: Attack
Mode, Tremolo On/Off, Reverb and
Volume.
39
NOTE:
3