HP Pavilion TouchSmart 14-b100 Maintenance And Service Manual page 87

Before removing the display assembly, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the display panel (see
6. Remove the keyboard (see
7. Remove the top cover (see
8. Remove the hard drive (see
9. Remove the USB board (see
10. Remove the WLAN (see
11. Remove the system board (see
Remove the display assembly:
CAUTION: Support the display assembly when removing the following screws. Failure to support
the display assembly can result in damage to the display assembly and other computer components.
1. Remove the four Phillips screws from the display hinges (1).
Battery on page 42).
Display panel on page
Keyboard on page 46).
Top cover on page 50).
Hard drive on page
USB board/audio jack on page
WLAN module on page
System board on page
44).
54).
57).
58).
61).
Component replacement procedures 79