Table of Contents
Advertisement
USB board
NOTE:
The USB board does not include the USB board cable. The USB board cable is included in
the Cable Kit, spare part number 665593-001.
Description
USB board
Before removing the USB board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
●
Optical drive (see
●
Hard drive (see
●
Keyboard (see
●
Top cover (see
Remove the USB board:
1.
Detach the USB board cable (1) from the base enclosure. (The USB board cable is attached to the
base enclosure with double-sided tape.)
2.
Remove the two Phillips PM2.5×5.0 screws (2) that secure the USB board to the base enclosure.
76
Chapter 4 Removal and replacement procedures
Battery on page
47), and then remove the following components:
Optical drive on page
Hard drive on page
51)
Keyboard on page
59)
Top cover on page
62)
48)
Spare part number
665331-001
Advertisement
Table of Contents
