Display Assembly - HP Pavilion dv3-4100 - Entertainment Notebook PC Maintenance And Service Manual

Display assembly

Description
13.3-in, BrightView, high-definition, LED display assembly (includes display panel cable, webcam/microphone module and
cable, 2 WLAN antenna cables and transceivers)
In black cherry
In brushed aluminum
In champagne
In shell white
In Sonoma red
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
a. Hard drive cover (see
b. Memory module/wireless module compartment cover (see
c. Keyboard (see
d. Top cover (see
Remove the display assembly:
1. Disconnect the display panel cable (1) from the system board and release the cable from the clip
(2) built into the base enclosure.
72 Chapter 4 Removal and replacement procedures
Battery on page 38), and then remove the following components:
Hard drive on page
Keyboard on page 55)
Top cover on page 51)
46)
Memory module on page
Spare part number
603903-001
603905-001
606021-001
606025-001
606023-001
39).