Restoring Default Settings In Setup Utility - HP Pavilion dv3-4100 - Entertainment Notebook PC Maintenance And Service Manual
Entertainment pc
Hide thumbs
Also See for Pavilion dv3-4100 - Entertainment Notebook PC:
- Supplementary manual (2 pages) ,
- User manual (122 pages)
Table of Contents
Advertisement
Restoring default settings in Setup Utility
The following procedure explains how to restore the Setup Utility default settings. If Setup Utility is not
already running, begin at step 1. If Setup Utility is already running, begin at step 2.
1.
Open Setup Utility by turning on or restarting the computer. While the "Press the ESC key for
Startup Menu" message is displayed in the lower-left corner of the screen, press f10.
– or –
Open Setup Utility by turning on or restarting the computer. While the "Press the ESC key for
Startup Menu" message is displayed in the lower-left corner of the screen, press esc. When the
Startup Menu is displayed, press f10.
2.
Use the arrow keys to select Exit > Load Setup Defaults, and then press enter.
3.
When the Setup Confirmation is displayed, press enter.
4.
To save your change and exit Setup Utility, use the arrow keys to select Exit > Exit Saving
Changes, and then press enter.
The Setup Utility default settings go into effect when the computer restarts.
NOTE:
The Setup Utility default settings go into effect when the computer restarts.
80
Chapter 5 Setup Utility
Advertisement
Table of Contents
