b.
Disconnect the webcam/microphone module cable (2) from the webcam/microphone
module.
c.
Remove the webcam/microphone module. The webcam/microphone module is available
using spare part number 599420-001.
7.
If it is necessary to replace the display panel:
a.
Detach the display panel cable (1) from the display enclosure. (The display panel cable is
attached to the display enclosure using double-sided tape).
b.
Disconnect the logo light cable (2) from the display panel cable.
c.
Remove the six Phillips PM2.5×5.0 screws (1) that secure the display panel to the display
enclosure.
d.
Lift the top edge of the display panel (2) until it rests at an angle.
Component replacement procedures
75