Startup Problems - HP OmniBook xe3-gf - Notebook PC Startup Manual

Startup problems

If the computer doesn't respond when you turn it on
• Connect the AC adapter.
• Slide the power switch to try turning on the unit.
• Reset the computer by inserting a straightened paper clip into the system-off switch
on the left side of the computer. Then turn it on by pressing the standby button.
• Don't use the touch pad while booting or resuming.
• If you get no response, remove the battery and AC adapter, remove any PC cards, and
undock the computer. Then plug in the AC adapter, reset the computer using the
system-off switch, and turn it on by pressing the standby button.
• If you still get no response, call HP for assistance.
If the computer doesn't boot from battery power
• Make sure the battery is properly inserted and fully charged.
• Check battery contacts.
• If another battery is available, try it.
Solving Problems with Your Computer
Troubleshooting Techniques
Startup Guide 57