Startup Problems - HP omnibook OBXT1500 Reference Manual

Troubleshooting and Maintenance
Getting Assistance for Your Notebook
If the left edge of printed output is missing
• Certain applications may not work properly with 600-dpi printers. If you're using
such a printer, try selecting a compatible printer driver for a 300-dpi printer. For
example, if you were using a 600-dpi HP LaserJet printer, you might try using the
HP LaserJet IIIsi driver (300 dpi).
If an infrared printer doesn't print
• Make sure the printer is on and has paper in it.
• Check for printer errors.
• Make sure Windows is running; otherwise infrared printing is not available.
• See "Infrared Problems" on page 104.

Startup Problems

If the notebook doesn't respond when you turn it on
• Connect the AC adapter.
• Reset the notebook by using a pen or straightened paper clip to press the reset switch
on the back of the notebook. Then press the power button to turn the notebook on.
• Don't use the touch pad while booting or resuming.
• If the notebook still doesn't respond, remove the battery and AC adapter, and remove
any PC Card. Then reset the notebook using the reset switch on the back of the
notebook, replace the battery and plug in the AC adapter, and turn on the notebook by
pressing the power button.
• If you still get no response, call HP for assistance.
If the notebook won't boot from battery power
• Make sure the battery is properly inserted and fully charged. Check the battery's
charge by clicking the power icon in the taskbar, or using Power Options in Control
Panel.
• If available, try another battery.
116 Reference Guide