To Install The Hp One-Touch Software - HP OmniBook vt6200 - Notebook PC Manual

Note
The HP Notebook utilities device implements the following features:
Undock security using the physical undock button located on the docking station.
Auto-standby on undock based on the BIOS settings.
Hibernate Fn hot key.
On certain systems, volume and mute control implemented through the operating system
that is actively reflected in the user interface.
The HP Notebook utilities driver provides access to important configuration interfaces
of the system BIOS. Therefore, you must be an administrator or have administrator
permissions to install and uninstall HP Notebook utilities.
To install HP Notebook utilities:
1. Run SETUP.EXE from the HPNBUTIL driver directory.
2. Follow the on-screen instructions to complete the installation.
After HP Notebook utilities has been successfully installed, you can launch the HP
Display Settings application by going to:
START/ALL PROGRAMS/ACCESSORIES/ACCESSIBILITY/HP DISPLAY
SETTINGS/NOTEBOOK DISPLAY
-or-
START/ALL PROGRAMS/HEWLETT-PACKARD/NOTEBOOK/HP DISPLAY
SETTINGS/NOTEBOOKDISPLAY

To install the HP One-Touch software

To enable the four user-programmable One-Touch buttons on the notebook, you must
install the One-Touch driver. The One-Touch buttons enable the user to launch an
application, open a document, or access a web site with the touch of a button. The task
associated with each button can be configured from Keyboard Properties.
If the Recovery CD does not include the One-Touch directory, you can download the
One-Touch software from the web at www.hp.com/support.
To install the One-Touch driver:
1. Run SETUP.EXE from the Recovery CD or the directory that contains the expanded
web files.
Installing Windows XP
Installing Retail Windows XP
Corporate Evaluator's Guide 105