To Create Or Copy Cds - HP OmniBook vt6200 - Notebook PC Manual

Important
Add-On Devices
Using Plug-In Modules
DVDs can have regional codes embedded in the disc data. These codes prevent DVD
movies from being played outside the region of the world in which they are sold. If you
get a region code error, you are trying to play a DVD intended for a different region.
Most DVD drives let you change the region code only a limited number of times
(usually no more than four). Please note that when you reach this limit, your last change
to the region code will be hard-coded on the DVD drive, and will be permanent. Your
HP warranty does not cover the expense of correcting this situation. Refer to the help for
your DVD player software for details about setting region codes.

To create or copy CDs

If your computer came with a CD-RW drive, it also includes software that lets you copy
or create CDs. Click Start, Programs (Windows 2000) or Start, All Programs,
Multimedia, CD Writer (Windows XP)—if Adaptec Easy CD, Veritas CDRW, or
RecordNow is not listed, do the following.
Run Setup on the software CD to install the CD-RW software.
For Windows XP, you can use Windows Media Player to create audio CDs, and
Windows Explorer to create data CDs using a CD-RW drive.
Refer to the software's help for details about creating or copying CDs. HP recommends
using HP C4403A (CD-R) or C4404A (CD-RW) media—read and write quality may
vary for other media.
If you also use the CD-RW drive in a docking system, you should recalibrate the drive
each time you move it, especially if you will be writing CDs. Use the CD-RW software
and a clean commercial CD for the calibration.
76 Corporate Evaluator's Guide