Table of Contents
Advertisement
Appendix A: Backup and recovery
5. Click Create.
6. Follow the on-screen instructions.
Restore to a previous date and time
To revert to a restore point (created at a previous date and time), when the computer was
functioning optimally, follow these steps:
1. Click Start, click Control Panel, click System and Security, and then click System.
2. In the left pane, click System protection.
3. Click the System Protection tab.
4. Click System Restore.
5. Follow the on-screen instructions.
Performing a recovery
You can recover only files that you have previously backed up. HP recommends that
you use Recovery Manager to create a set of recovery discs (entire drive backup) as
soon as you set up your computer.
Recovery Manager software allows you to repair or restore the system if you experience
system failure or instability. Recovery Manager works from recovery discs that you create or
from a dedicated recovery partition (select models only) on the hard drive. However, if your
computer includes a solid-state drive (SSD), you may not have a recovery partition. If that is
the case, recovery discs have been included with your computer. Use these discs to recover
your operating system and software.
Windows has its own built-in repair features, such as System Restore. If you have not
already tried these features, try them before using Recovery Manager. For more
information on these built-in repair features, click Start, and then click Help and
Support.
Recovery Manager recovers only the software that was preinstalled at the factory.
Software not provided with this computer must be downloaded from the manufacturer's
Web site or reinstalled from the disc provided by the manufacturer.
Recovering using the recovery discs
To restore the system from the recovery discs:
1. Back up all personal files.
2. Insert the first recovery disc into the optical drive and restart the computer.
3. Follow the on-screen instructions.
24
Notebook Essentials
Advertisement
Table of Contents
