Viewing And Changing Adapter Properties - Dell QLogic Family of Adapters User Manual

Windows NIC Driver Management Applications: QLogic QME8242 Mezzanine Card User's Guide
Back to Contents Page
Windows NIC Driver Management Applications: QLogic QME8242
Mezzanine Card User's Guide
Overview

Viewing and Changing Adapter Properties

Overview
In the QConvergeConsole CLI (qaucli) utility, you can view VLAN and teaming overview information by issuing the qaucli –nt
–zvt command. (The qaucli is an installation option available when you install the Windows drivers; see
Installation and Configuration.)
Viewing and Changing Adapter Properties
This section provides information on using the QConvergeConsole CLI for:
Viewing Adapter Properties
Changing Adapter Properties
Viewing Adapter Properties
Issue the following commands to view the adapter properties.
To list all detected QME8242 ports:
qaucli -nic -i [cna_port_inst]
To view QME8242 information:
qaucli -nic -icna [cna_port_inst]
To view port Data Center Bridging Exchange (DCBX) protocol information:
qaucli -nic -idcbx [cna_port_inst]
To view configured port settings:
qaucli -nic -iset [cna_port_inst]
To view physical link status:
qaucli -nic -link [cna_port_inst]
To view port information:
qaucli -nic -pinfo [cna_port_inst]
Changing Adapter Properties
NOTE: For an adapter that is teamed or an adapter with VLANS, do not directly modify the adapter properties. To
ensure that the properties of all teamed adapters and adapters with VLANs remain synchronized with the team
properties, make property changes only on the Team Management page (see
To configure the QME8242 port, issue the following command:
qaucli -nic -n [cna_port_inst] <config_name|config_alias> <value> [<config_name|config_alias>
<value>]
You can set the following properties:
file:///T|/htdocs/NETWORK/QLogic/71922/en/windrivr.htm[9/26/2012 4:25:48 PM]
Windows Driver
Modifying a Team).