Installing Printer Drivers on Windows
Identifying Printer Driver Pre-install Status
Before installing the printer driver on your computer, check the IP address of your printer by performing one of the
procedures in "Verifying the IP Settings."
Changing the firewall settings before installing your printer
If you are running one of the following operating systems, you must change the firewall settings before installing the
Dell printer software:
®
•
Microsoft
Windows XP
®
•
Windows Vista
•
Windows 7
•
Windows 8
®
•
Windows Server
2008
•
Windows Server 2008 R2
•
Windows Server 2012
NOTE:
For Windows XP, Service Pack 2 or 3 must be installed.
The following procedure uses Windows 7 as an example.
Software and Documentation
1 Insert the
2 Click Start → Control Panel.
3 Select System and Security.
4 Click Allow a program through Windows Firewall.
5 Click Change settings → Allow another program.
6 Check Browse.
7 D:\setup_assist.exe (where D is the drive letter of the optical drive) in the File name text box, and then
click Open.
8 Click Add, and then click OK.
Inserting the Software and Documentation Disc
Software and Documentation
1 Insert the
Navigator.
NOTE:
If the Software and Documentation disc does not launch automatically, follow the procedure below.
For Windows XP, Windows Server 2008, and Windows Server 2008 R2
Click start→ Run, enter
box, and then click OK.
For Windows Vista and Windows 7
Click Start → All Programs → Accessories → Run, enter
the optical drive) in the Run dialog box, and then click OK.
disc into your computer.
disc into your computer and click setup_assist.exe to start Easy Setup
D:\setup_assist.exe
®
(where D is the drive letter of the optical drive) in the Run dialog
D:\setup_assist.exe
Installing Printer Drivers on Windows
10
Computers
(where D is the drive letter of
®
Computers
91