Dell C3765dnf Color Laser Printer User Manual page 245

Purpose:
To confirm the wireless communication status.
Values:
Status
SSID
Encryption Type
Wireless Setup Wizard
NOTE:
Wireless Setup Wizard is available only when the printer is connected using the wireless network.
Purpose:
To configure the wireless network interface.
Values:
Select Access
WEP Key
Pass Phrase
Manual SSID Setup Enter SSID
Infrastructure
Good
Acceptable
Low
No Reception
Displays the name that identifies the wireless network.
Displays the encryption type.
No Security
*
Mixed mode PSK
WPA-PSK-TKIP
WPA2-PSK-AES
WEP
Select the access point from the list.
When you select an access point using WEP as the
encryption type, enter the WEP key.
When you select an access point using WPA, WPA2, or
Mixed as the encryption type, enter the pass phrase.
Specifies a name to identify the wireless network. Up to 32
alphanumeric characters can be entered.
Select when you configure the wireless setting through the
access point such as a wireless router.
Specifies No Security to configure the wireless setting
without specifying a encryption type from WEP , WPA-PSK-
TKIP , and WPA-PSK-AES.
Select to configure the wireless setting with the encryption
type of Mixed mode PSK. Mixed mode PSK automatically
selects the encryption type from either WPA-PSK-TKIP ,
WPA-PSK-AES, or WPA2-PSK-AES.
Pass Phrase Specifies the passphrase of
alphanumeric characters from 8 to 63.
Select to configure the wireless setting with the encryption
type of WPA-PSK-TKIP .
Pass Phrase Specifies the passphrase of
alphanumeric characters from 8 to 63.
Select to configure the wireless setting with the encryption
type of WPA2-PSK-AES.
Pass Phrase Specifies the passphrase of
alphanumeric characters from 8 to 63.
Specifies the WEP key to use through the wireless network.
For 64bit keys, up to 10 hexadecimal characters can be
entered. For 128bit keys, up to 26 hexadecimal characters
can be entered.
Understanding the Printer Menus
243