Dell C3765dnf Color Laser Printer User Manual page 158

PS Fonts List
PDF Fonts List
Job History
Error History
Print Meter
Color Test Page
Protocol Monitor
Speed Dial
Address Book
Server Address
Fax Activity
Fax Pending
*1
Stored Documents
*1
This item is available only when RAM Disk is enabled or the optional hard disk is installed.
Printer Settings
The Printer Settings tab includes System Settings, Network Settings, USB Settings, PCL Settings, PostScript
Settings, PDF Settings, Secure Settings, Copy Defaults, Copy Color Balance, Copy Settings, Fax Defaults, Fax
Settings, Scan Defaults, and USB Direct Print Defaults pages.
System Settings
Purpose:
To configure the basic printer settings.
Values:
Power Saver Time - Sleep
Power Saver Time - Deep Sleep
mm / inch
Display Brightness
Control Panel Tone
Invalid Key Tone
Machine Ready Tone
Copy Completed Tone
Job Completed Tone
Fault Tone
Alert Tone
156
Dell™ Printer Configuration Web Tool
Click Start to print the PS Fonts List.
Click Start to print the PDF Fonts List.
Click Start to print the Job History report.
Click Start to print the Error History report.
Click Start to print the Print Meter report.
Click Start to print the Color Test Page.
Click Start to print the Protocol Monitor report.
Click Start to print the Speed Dial report.
Click Start to print the Address Book report.
Click Start to print the Server Address report.
Click Start to print the Fax Activity report.
Click Start to print the Fax Pending report.
Click Start to print the Stored Documents list.
Sets the time taken by the printer to enter Sleep mode after it finishes a job.
Sets the time taken by the printer to enter Deep Sleep mode after it has
entered Sleep mode.
Sets the measurement unit to be used on the touch panel as either mm or
inches.
Sets the brightness level of the touch panel screen.
Sets the volume of the tone that is emitted when the operator panel input is
correct, or disables the tone.
Sets the volume of the tone that is emitted when the operator panel input is
incorrect, or disables the tone.
Sets the volume of the tone that is emitted when the printer becomes ready,
or disables the tone.
Sets the volume of the tone that is emitted when a copy job is complete, or
disables the tone.
Sets the volume of the tone that is emitted when a job other than a copy job
is complete, or disables the tone.
Sets the volume of the tone that is emitted when a job ends abnormally, or
disables the tone.
Sets the volume of the tone that is emitted when a problem occurs, or
disables the tone.