Dell B5465dnf Mono Laser Printer MFP User Manual page 209

Understanding the printer menus
Use
Paper Source
Tray [x]
MP Feeder
Manual Paper
Manual Envelope
Collate
1,1,1 ‑ 2,2,2
1,2,3 ‑ 1,2,3
Sides (Duplex)
1 sided
2 sided
Duplex Binding
Long Edge
Short Edge
Paper Saver
Off
2‑Up
3‑Up
4‑Up
6‑Up
9‑Up
12‑Up
16‑Up
Paper Saver Ordering
Horizontal
Reverse Horizontal
Reverse Vertical
Vertical
Paper Saver Orientation
Auto
Landscape
Portrait
Paper Saver Border
None
Solid
To
Set a default paper source for all print jobs.
Note: Tray 1 is the factory default setting.
Stack the pages of a print job in sequence when printing multiple copies.
Note: "1,2,3 ‑ 1,2,3" is the factory default setting.
Specify whether prints are on one side or on both sides of the page.
Note: "1 sided" is the factory default setting.
Define binding for duplexed pages in relation to page orientation.
Notes:
• Long Edge sets binding along the long edge of the page (left edge for portrait and top edge
for landscape).
•
Short Edge sets binding along the short edge of the page (top edge for portrait and left
edge for landscape).
Specify that multiple pages are printed on one side of a sheet.
Notes:
•
Off is the factory default setting.
•
The number selected is the number of pages that will print per side.
Print multiple-page images on one side of a paper.
Notes:
•
Horizontal is the factory default setting.
•
Positioning depends on the number of pages and whether they are in portrait or landscape
orientation.
Specify the orientation of a multiple‑page document.
Note: Auto is the factory default setting. The printer chooses between portrait and landscape.
Print a border on each page image.
Note: None is the factory default setting.
209