Dell B5465dnf Mono Laser Printer MFP User Manual page 186

Understanding the printer menus
Use
Press Sleep Button
Do Nothing
Sleep
Hibernate
Press and Hold Sleep Button
Do Nothing
Sleep
Hibernate
Factory Defaults
Do Not Restore
Restore Now
To
Determine how the printer, while in idle state, reacts to a short
press of the Sleep button.
Notes:
• Sleep is the factory default setting.
• Sleep or Hibernate sets the printer to operate at a lower
power configuration.
• If the printer is in Sleep mode, then the display appears off
and the Sleep button turns amber in color.
•
Touch anywhere on the display or press a button on the
printer control panel to exit Sleep mode.
•
If the printer is in Hibernate mode, then the display is
completely off and the Sleep button turns amber and is
blinking.
Determine how the printer, while in idle state, reacts to a short
press of the Sleep button.
Notes:
•
Do Nothing is the factory default setting.
•
Sleep or Hibernate sets the printer to operate at a lower
power configuration.
•
If the printer is in Sleep mode, then the display appears off
and the Sleep button turns amber.
•
Press and hold the Sleep button for three seconds or longer
to enter Hibernate mode.
•
Touch anywhere on the display or press a button on the
printer control panel to exit Sleep mode.
Restore the printer settings to the factory default settings.
Notes:
•
Do Not Restore is the factory default setting. This keeps the
user‑defined settings.
•
Restore Now returns all printer settings to the factory
default settings except Network/Ports menu settings. All
downloads stored in the RAM are deleted. Downloads stored
in flash memory or in a printer hard disk are not affected.
186