Specifications - FujiFilm FinePix F450 Owner's Manual

Troubleshooting
Troubleshooting Possible causes
Frame erase does not Some frames may be protected.
erase the frame.
The ERASE ALL
function does not erase
all the frames.
Screens are not A language other than English is selected
displayed in English. in the " " setting in the "SET-UP"
menu (➡P.61).
i The included A/V cable was connected
There is no image or
sound on the TV. during movie playback.
i The camera is not connected to the TV
correctly.
i "TV" is selected as the TV input.
i The video output setting is incorrect.
i The TV volume is turned down.
The TV image is black The video output setting is incorrect.
and white.
When the camera is i The USB cable is not correctly
connected to a PC, the connected to the PC or camera.
photographed image or i The PC is not turned on.
playback image appears
on the camera's LCD
monitor.
i Camera malfunction.
Nothing happens when
I use the Mode switch.
i The battery runs out.
The camera no longer The camera has suffered an unforeseen
works correctly. problem.
®
Can't print with " " is not selected in USB mode in the
PictBridge. "SET-UP" menu.
The camera was
connected to a PC
when the USB mode
®
was set to " ".
94
eIf you think the camera is faulty, check the following once more.
Solutions
Unprotect frames using the camera on
which the protection was first applied.
1Press the "MENU/OK" button to display
the menu.
2Press "d" or "c" to select " F
"a" or "b" to select "SET-UP". (Press the
"MENU/OK" button to display the "SET-
UP" screen on the LCD monitor.)
3Press "d" or "c" to move to option 3 and
then press "a" or "b" to select "
4Press "d" or "c" several times to select
"ENGLISH".
5Press the "MENU/OK" button.
i After the movie playback mode is stopped,
connect the camera and TV correctly.
i Connect the camera and TV correctly.
i Set the TV input to "VIDEO".
i Change the setting to "NTSC" or "PAL" (➡P.61).
i Adjust the volume.
Change the setting to "NTSC" or "PAL"
(➡P.61).
i Set up the camera and the USB cable
(included) correctly.
i Turn the PC on.
i Briefly remove the battery or disconnect the
AC power adapter. Then reload the battery or
reconnect the AC power adapter and try again.
i Load a new or fully charged battery.
Briefly remove the battery or disconnect
the AC power adapter. Then reload the
battery or reconnect the AC power adapter
and try again. If the message still appears,
contact your FUJIFILM dealer.
®
Select " " in USB mode in the "SET-
UP" menu.
Perform steps 1 to 3 to remove the
camera from PC.
h Windows
1 The "New Hardware Found" wizard (or
"Scanner and Camera" wizard)
appears. If the wizard does not appear,
proceed to step 3.
2 Click the [Cancel] button.
3 Disconnect the camera from the PC.
h Macintosh
1 The window for locating the driver
appears. If the window does not
appear, proceed to step 3.
2 Click the [Cancel] button.
3 Disconnect the camera from the
Macintosh.

Specifications

System
Model
Effective pixels
CCD sensor
Storage media
File format
" and press
Number of recorded pixels
".
Lens
Focal length
Focus
Focal range
Shutter speed
Aperture
Sensitivity
Photometry
Exposure control
Exposure compensation
White balance
Viewfinder
LCD monitor
Flash type
Self-Timer
Video output
Input/Output Terminals
External connection terminals
DC Input
Digital camera FinePix F450
5.2 million pixels
1/2.5 inch square pixel CCD
Number of total pixels 5.36 million pixels
xD-Picture Card (16/32/64/128/256/512 MB)
Still image: JPEG (Exif ver. 2.2)
✽ Design rule for Camera File System compliant DPOF compatible
Movie: AVI format, Motion JPEG
Audio: WAVE format, Monaural sound
Still image: 2592 × 1944 pixels/2048 × 1536 pixels/1600 × 1200 pixels/
640 × 480 pixels (
÷ 3 2 `
/ / / )
Movie: 320 × 240 pixels (10 frames per second with monaural sound)
160 × 120 pixels (10 frames per second with monaural sound)
Fujinon 3.4 × optical zoom lens
Aperture: F2.8 to F5.5
f=6.3 mm to 21.6 mm
(Equivalent to 38 mm to 130 mm on a 35 mm camera)
TTL contrast-type, Auto focus
Normal: Approx. 60 cm (2.0 ft.) to infinity
Macro: Wide-angle: Approx. 9.0 cm (3.5 in.) to 80 cm (2.6 ft.)
Telephoto : Approx. 39 cm (1.3 ft.) to 80 cm (2.6 ft.)
2 sec. to 1/2000 sec. (depend on Exposure mode)
F2.8 to F7.4 (automatically selected)
a
Photography mode ( ): AUTO (Equivalent to ISO 80-400, depending on
conditions)/80/100/200/400
Photography mode ( s , m , , , . , / ): ISO 80/100/200/400
TTL 64-zones metering
Program AE
–2.1 EV to +1.5 EV in 0.3 Steps EV increments (in Manual photography mode)
a m , . /
Photography mode ( , , , , ): AUTO
s
Photography mode ( ): 7 positions can be selected
Real image optical Approx. 78% coverage
2.0-inche, 154,000 pixels low-temperature poly-silicon TFT, Approx. 97%
coverage
Auto flash
Effective range: Wide-angle: Approx. 0.6 m-3.6 m (2.0 ft.-12.0 ft.)
Telephoto: Approx. 0.6 m-2.0 m (2.0 ft.-6.7 ft.)
Macro: Approx. 0.3 m-0.8 m (1.0 ft.-2.6 ft.)
Flash modes: Auto, Red-eye reduction, Forced flash, Suppressed flash,
Slow synchro, Red-eye reduction + Slow synchro
10 sec.
NTSC/PAL selectable
Special USB cable, special A/V cable, cradle connection
To connect the AC power Adapter AC-5VW
95