FujiFilm FinePix F450 Owner's Manual page 39

6.2 CONNECTING TO A PC
USE AT DSC MODE
1
1 0
2 0
2
USB socket
3
4
1 0 3 0
ON OFF
0 2
ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
3
1 2 4
ＦＲＡＭＥ ＮＯ． ：ＣＯＮＴ． ＦＲＡＭＥ ＮＯ． ：ＣＯＮＴ．
ＵＳＢ ＭＯＤＥ ＵＳＢ ＭＯＤＥ
ＳＴＡＲＴ−ＩＭＡＧＥ ：ＯＦＦ ＳＴＡＲＴ−ＩＭＡＧＥ ：ＯＦＦ
言語／ＬＡＮＧ． ：ＥＮＧＬＩＳＨ 言語 ／ＬＡＮＧ． ：ＥＮＧＬＩＳＨ
ＳＥＴ ＳＥＴ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
5
76
1 Plug the included USB cable into the cradle USB
socket.
2 Plug the AC power adapter connector into the
"DC IN 5V" socket on the cradle and then plug
the AC power adapter into the power outlet.
1 Turn your PC on.
2 Use the USB cable to connect the cradle.
Insert an xD-Picture Card into the camera.
1 Slide the Power switch to the side to turn the
camera on.
¶
2 Select " " in "USB MODE" in the "SET-UP"
menu (➡P.60).
3 Slide the Power switch to the side to turn the
camera off.
Set the camera in the cradle.
6
1 0
2 0
Camera Operation
◆
Connecting the camera without the cradle
socket
DC IN 5V socket
1 Set the "USB/PLAY" switch on the cradle to the
"USB" position.
2 Press the "POWER" button on the cradle to turn
the power on.
h When the camera and PC are exchanging data,
the self-timer lamp blinks and the viewfinder lamp
blinks alternately green and orange.
¶
h " DSC" appears on the LCD monitor.
h Power save and Auto power off are disabled
during USB connection.
●
!
Before replacing the xD-Picture Card, always disconnect the
camera from the PC. See P.79 for information on the
disconnection procedure.
●
!
Do not disconnect the USB cable when the camera is
communicating with the PC. See P.79 for information on the
disconnection procedure.
◆
Connect the AC power adapter, USB cable or A/V
cable (included) to the camera directly.
Continued
6
77