FujiFilm FinePix F450 Owner's Manual page 22

o ERASING SINGLE / ALL FRAMES
PLAYBACK MENU
１００−０００９ １００−０００９
ＦＲＡＭＥ ＦＲＡＭＥ
ＥＲＡＳＥ ＯＫ？ ＥＲＡＳＥ ＯＫ？
ＹＥＳ ＹＥＳ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
1 0 2 0
１００−０００９ １００−０００
ＡＬＬ ＦＲＡＭＥＳ ＡＬＬ ＦＲＡＭＥＳ
ＥＲＡＳＥ ＡＬＬ ＯＫ？ ＥＲＡＳＥ ＡＬＬ ＯＫ？
ＩＴ ＭＡＹ ＴＡＫＥ Ａ ＷＨＩＬＥ ＩＴ ＭＡＹ ＴＡＫＥ Ａ ＷＨＩＬＥ
ＹＥＳ ＹＥＳ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
e r
If " " or "
button again to erase the frames (files).
◆
To stop the procedure midway
ＡＬＬ ＦＲＡＭＥＳ ＡＬＬ ＦＲＡＭＥＳ
ＣＡＮＣＥＬ ＣＡＮＣＥＬ
42
FRAME
1 Press "d" or "c" to select the frame (file) to be
erased.
2 Press the "MENU/OK" button to erase the
currently displayed frame (file).
To erase another frame (file), repeat steps 1 and 2.
When you have finished erasing frames (files),
press the "DISP/BACK" button.
●
!
Pressing the "MENU/OK" button repeatedly erases
consecutive frames (files). Take care not to erase a frame
(file) by mistake.
●
!
Protected frames (files) cannot be erased. Unprotect the
frames (files) before erasing them (➡P.43).
ALL FRAMES
Pressing the "MENU/OK" button erases all the
frames (files).
●
!
Protected frames (files) cannot be erased. Unprotect the
frames (files) before erasing them (➡P.43).
" appears, press the "MENU/OK"
◆
Press the "DISP/BACK" button to cancel erasing of
all the frames (files). Some unprotected frames (files)
will be left unerased.
●
!
Even if you stop the procedure immediately, some frames
(files) will be erased.
PLAYBACK MENU
i PROTECTING IMAGES: FRAME / SET ALL / RESET ALL
1
1 0 0 2
2
ＰＲＯＴＥＣＴ ＰＲＯＴＥＣＴ
ＲＥＳＥＴ ＡＬＬ ＲＥＳＥＴ ＡＬＬ
ＳＥＴ ＡＬＬ ＳＥＴ ＡＬＬ
ＦＲＡＭＥ ＦＲＡＭＥ
3
1 0 2 0
ＰＲＯＴＥＣＴ ＰＲＯＴＥＣＴ
ＲＥＳＥＴ ＡＬＬ ＲＥＳＥＴ ＡＬＬ
ＳＥＴ ＡＬＬ ＳＥＴ ＡＬＬ
ＦＲＡＭＥ ＦＲＡＭＥ
１００−０００９ １００−０００
ＦＲＡＭＥ ＦＲＡＭＥ
ＰＲＯＴＥＣＴ ＯＫ？ ＰＲＯＴＥＣＴ ＯＫ？
ＹＥＳ ＹＥＳ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
0 1 2 0
w
1 Set the Mode switch to " ".
2 Press the "MENU/OK" button to display the
menu on the LCD monitor.
Protection is a setting that prevents frames (files)
from being accidentally erased. However, the
"FORMAT" function erases all the frames (files),
including protected frames (files) (➡P.62).
Press "d" or "c" to select " i " PROTECT.
RESET ALL
Removes the protection from all the frames (files).
SET ALL
Protects all the frames (files).
FRAME
Protects or unprotects only the selected frame (file).
1 Press "a" or "b" to select "FRAME", "SET ALL"
or "RESET ALL".
2 Press "MENU/OK" button to confirm your
selection.
FRAME SET
1 Press "d" or "c" to select the frame (file) to be
protected.
2 Press the "MENU/OK" button to protect the
frame (file) currently displayed.
To protect another frame (file), repeat steps 1 and
2. To finish protecting frames (files), press the
"DISP/BACK" button.
Continued
3
43