Preparation
Connecting the Display and AVC System
Use the supplied system cable.
1
Remove the back cover of the display.
• Press both of your thumbs upwards against
the two claws on lower side of the cover (✩)
and pull away the cover.
2
Remove the system cable cover.
3
1 Insert the system cable connectors into the
display input terminal on the display and the
out put terminal on the AVC system until
they click.
2 Connect the AC power cords to the AC
power inputs on the display and the AVC
system.
• After connecting the various cables, fasten
them using the provided cable clamps as
shown in the diagram below before mounting
the cover.
Rear view
Pass over the pins
Supplied
cable clamp
2
3
-
2
e.g. Cables from
the optional
speakers
Removing the system
cable cover
Hold this tab and slide the
cover downward.
2
3
-
1
3
-
1
3
-
6
9
GB