Sharp LC-28HM2 Operation Manual page 22

Lcd av monitor
Hide thumbs Also See for LC-28HM2:
Table of Contents

Advertisement

Adjustment
AV mode
Mode
Selected item
[AUTO]
Automatically sets to a suitable
picture size
SIDE BAR
[POSITION]
Manually set to a desired position
[V-POSI.]
CINEMA
[H-POSI.]
[RESET]
[AUTO]
Automatically sets to a suitable
picture size
WIDE
[POSITION]
Manually set to a desired position
PC mode
Mode
SIDE BAR
CINEMA
FULL
DOT BY DOT
* "Clock" and "PHASE" will only be displayed during the PC mode.
20
GB
Selected item
[CLOCK]
[PHASE]
[V-POSI.]
[H-POSI.]
[RESET]
Setting
"ON"
"OFF"
"V" Shifting the picture vertically (–10~+10)
"H" Shifting the picture horizontally (–30~+30)
"RESET" Returning to the factory setting
Shifting the picture vertically (–30~+30)
Shifting the picture horizontally (–30~+30)
Returning to the factory setting
"ON"
"OFF"
"V" Shifting the picture vertically (–15~+15)
"H" Shifting the picture horizontally (–30~+30)
"RESET" Returning to the factory setting
Setting
Adjust when flicker in the form of vertical
stripes appears. (–90~+90)
Adjust if contrast can not be obtained or flicker
occurs when letters, etc. are displayed.
(–20~+20)
Adjust when the picture is too high or too low.
(–60~+60)
Adjust when the picture is too far to the right or
too far to the left. (–90~+90)
Returning to the factory setting

Advertisement

Table of Contents
loading

Table of Contents